No I've not gotten it done. We are waiting till later in the fall. Kirsh landscape on Mills branch does both plaster and the Pebble tec type products. Northwoods pools was another that specializes in Pebble tec and is an authorized dealer and installer of the product. They also replaster. Our pool would be (22k gallons) around 5k just for plastering. Pebble tec product would be 7-9k on a pool our size. We would want to go ahead and change out the tile and the coping. It's faded and has some grouting needed to be replaced. This would probably be in the tune of another 3k. We'd be looking at dropping about 12k. We're rethinking the pebble tec even though it's gorgeous and has a longer life than the plaster. I am basically researching and when we get closer to the end of the pool season will decide. Do your homework. As I understand it, the regulations on the plaster mix have been changed over the last two years or so and you don't know what your getting. So I have been told. We're going to be here for at least 9 years and just want to enjoy the pool. The cascade fountain has a small leak and we never turn it on.
@ctl74 4951